Publicidad
Idiomas disponibles
Idiomas disponibles
Questions, problems, missing parts?
Before returning the unit to your dealer, call us at 330-274-8317, Monday-Friday, or email us at
customerservice@atlantic-oase.com.
Safety information
Electrical connection
• Special regulations apply to electrical installation in outdoor areas. Only allow a qualified elec-
trician to perform the electrical installation.
– The qualified electrician has the required professional training, knowledge and skills to per-
form electrical installations in outdoor areas. The qualified electrician can detect potential
risks and adheres to regional and national standards, regulations and directives.
– For your own safety, please consult a qualified electrician.
• Only connect the unit if the electrical data of the unit and the power supply match.
• Only connect the device to a correctly installed socket.
• The device is to be supplied through a residual current device (RCD) having a rated residual op-
erating current not exceeding 30 mA.
• Extension cables and power distributors (e.g. outlet strips) must be suitable for outdoor use
(splash-proof).
• Protect open plugs and sockets from moisture.
Safe operation
• Do not use the unit, if electrical lines or the housing are damaged.
• Dispose of the unit if its power connection cable is damaged. The power connection cable can-
not be replaced.
• Do not carry or pull the unit by its power cable.
• Never make technical modifications to the unit.
• Only carry out work on the unit that is described in this manual.
• Only use original spare parts and accessories.
• Route lines so that they are protected from damage and nobody can trip over them.
• Should problems occur, please contact the authorized customer service or OASE.
WARNING
Serious injury or death due to dangerous electrical voltage is possible with an electrical device in
water operated with a voltage U > 12 V AC or U > 30 V DC.
Disconnect all electrical devices in the water from the power supply before reaching into the
water.
Disconnect the device from the power supply before starting work on the unit.
4
Publicidad
