Publicidad
Idiomas disponibles
Idiomas disponibles
Replacing the cleaning rotor
On the FiltoClear 5200 und FiltoClear 8200, there is an additional cleaning rotor above the quartz
glass to clean the quartz glass, powered by the water flow.
• Replace the cleaning rotor if it is worn.
Prerequisite:
• The quartz glass has been removed. (→ Cleaning/replacing the quartz glass)
How to proceed:
• Check the profile wear at both ends and the inner surfaces of the cleaning rotor.
– If the profile is worn, the cleaning rotor will rotate sluggishly and has to be replaced.
• Insert the cleaning rotor in the UVC water housing.
26
FCL0029
Publicidad
