Descargar Imprimir esta página

Oase FiltoClear 3400 Instrucciones De Uso página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

Switching the UVC clarifier on/off
• Switching on: Plug the power plug into the outlet.
– The unit switches on immediately.
– The indicator lamp lights up.
– The flow lug on the outlet will show you that water is flowing.
• Switching off: Pull the power plug from the outlet.
Operation
The pressure filter can remain in operation for the entire pond season (the filter pump and the
UVC clarifier are switched on).
• At water temperatures below 50 °F (10 °C), the filter biology is no longer active.
• Take the unit out of operation at water temperatures below 47 °F (8 °C) or, at the latest, when
freezing temperature are to be expected. (→ Decommissioning/winter storage)
• The UVC lamp is a wear part. Replace the UVC lamp after a specific operating duration to en-
sure optimal filtration power. (→ Replacing the UVC lamp)
Maintenance and cleaning
NOTE
Do not use aggressive cleaning agents or chemical solutions. These agents can damage the
housing, impair the function of the device and harm animals, plants and the environment.
Only clean the unit from the outside with clear water and a soft brush.
EN
FCL0015
15

Publicidad

loading

Este manual también es adecuado para:

Filtoclear 5200Filtoclear 8200