Descargar Imprimir esta página

Milwaukee 2970-20 Manual Del Operador página 11

Ocultar thumbs Ver también para 2970-20:

Publicidad

Idiomas disponibles

Idiomas disponibles

Contact Corporate After Sales Service Technical Support with technical, service/repair, or
Become a Heavy Duty Club Member at www.milwaukeetool.com to receive important
LIMITED WARRANTY USA & CANADA
Every MILWAUKEE power tool* (see exceptions below) is warranted to the original
purchaser only to be free from defects in material and workmanship. Subject to certain
exceptions, MILWAUKEE will repair or replace any part on an electric power tool
which, after examination, is determined by MILWAUKEE to be defective in material or
workmanship for a period of five (5) years** after the date of purchase unless otherwise
noted. Return of the power tool to a MILWAUKEE factory Service Center location or
MILWAUKEE Authorized Service Station, freight prepaid and insured, is required. A copy
of the proof of purchase should be included with the return product. This warranty does not
apply to damage that MILWAUKEE determines to be from repairs made or attempted by
anyone other than MILWAUKEE authorized personnel, misuse, alterations, abuse, normal
wear and tear, lack of maintenance, or accidents.
Normal Wear: Many power tools need periodic parts replacement and service to achieve
best performance. This warranty does not cover repair when normal use has exhausted the
life of a part including, but not limited to, chucks, brushes, cords, saw shoes, blade clamps,
o-rings, seals, bumpers, driver blades, pistons, strikers, lifters, and bumper cover washers.
*This warranty does not cover Air Nailers & Staplers; Airless Paint Sprayer; Cordless Battery
Packs; Gasoline Driven Portable Power Generators; Hand Tools; Hoist – Electric, Lever
& Hand Chain; M12™ Heated Gear; Reconditioned Product; and Test & Measurement
Products. There are separate and distinct warranties available for these products.
**The warranty period for Job Site Radios, M12™ Power Port, M18™ Power Source,
Jobsite Fan and Trade Titan™ Industrial Work Carts is one (1) year from the date of
purchase. The warranty period for the M18 FUEL™ 1" D-Handle High Torque Impact
Wrenches, Drain Cleaning Cables, AIRSNAKE™ Drain Cleaning Air Gun Accessories,
REDLITHIUM™ USB Laser Levels and TRAPSNAKE™ 25' Auger w/ CABLE DRIVE™
is two (2) years from the date of purchase. The warranty period for the M18™ Compact
Heat Gun, 8 Gallon Dust Extractor, M18™ Framing Nailers, M18 FUEL™ 1/2" Ext. Anvil
Controlled Torque Impact Wrench w/ ONE-KEY™, M18 FUEL™ 1" High Torque Impact
Wrench w/ ONE-KEY™, M18 FUEL™ 2 Gal. Compact Quiet Compressor, M12™ Laser
Levels, 165' Laser Detector, M12™ 23GA Pin Nailer, M18 FUEL™ 1/4" Blind Rivet Tool w/
ONE-KEY™, M12 FUEL™ Low Speed Tire Buffer, M18 FUEL™ Random Orbital Polishers,
and the M18™ Utility Fencing Stapler is three (3) years from the date of purchase. The
SERVICE – UNITED STATES
1-800-SAWDUST
Monday-Friday, 7:00 AM - 6:30 PM CST
or visit www.milwaukeetool.com
warranty questions.
Email: metproductsupport@milwaukeetool.com
notifications regarding your tool purchases.
SERVICE - CANADA
Milwaukee Tool (Canada) Ltd
1.800.268.4015
Monday-Friday, 7:00 AM - 4:30 PM CST
or visit www.milwaukeetool.ca
(1.800.729.3878)
7

Publicidad

loading

Este manual también es adecuado para:

2971-202973-202974-202975-202976-20