Milwaukee 2970-20 Manual Del Operador página 19

2 M18™ Wireless Monitor
2.2 Setup of the M18™ Wireless Monitor
This section of the manual covers setting up the features and options of the M18™
Wireless Monitor. Mounting the Wireless Monitor to the Pipeline Inspection Reel is
covered in section 4.4 of this manual.
2.2.1 Power on/off
Press the Power
navigation dial will illuminate, showing that the power is on. The Wireless Monitor icon will
appear in the status bar of the LCD along with the battery state.
2.2.2 M18™ Wireless Monitor First Time Setup
All the settings are saved into the M18™ Wireless Monitor's memory and will remain
there until changed. Note that the settings will be lost if the unit is reset to factory defaults
or by formatting the M18™ 500GB Control Hub Internal Drive. The Pipeline Inspection
Reel with camera does not need to be connected to for the first-time setup.
These initial Wireless Monitor settings will set the Units of distance measurement, Date
& Time formats, Sonde frequencies, Video, and Image quality, Connection Settings and
Language.
These settings can also be performed through a tablet running the Milwaukee® Pipeline
Inspection App.
2.2.3 Navigating through the Settings Menu
Navigation Dial - Turn the navigation dial clockwise or counterclockwise to
move through the menus. While rotating the Navigation Dial, the position/
menu items will be highlighted by the red cursor line.
Press the Navigation Dial to select and accept the setup menu options.
Back Button - Pressing the Back button while in any menu or sub-menu
will take the screen back to the previous menu. Press the Back Button
repeatedly to return to the main viewing screen.
button on the M18™ Wireless Monitor. The buttons and
15