Milwaukee 2970-20 Manual Del Operador página 34

2 M18™ Wireless Monitor
4. Press the Picture
moment confirming that the image was captured.
At the end of the session, press the Record
file.
2.3.3 Export Job
The Export Job allows for the copying of files from the M18™ 500GB Control Hub Internal
Drive to the Control Hub Thumb Drive.
From within the Gallery
From the Manage Jobs option, under Settings
in one session.
Export Job from the Gallery
1. From the Gallery
2. Use the navigation dial to select Export
3. Use the navigation dial to select the export destination of Control Hub Thumb Drive,
press the navigation dial. The progress indicator will appear showing the status.
Control Hub Thumb Drive
3.942GB/29.817GB
4. Wait for the progress indicator to run until completed.
Export from within the Settings menu
1. From the main viewing screen, turn the navigation dial to Settings
navigation dial.
2. Turn the navigation dial to Manage Jobs, press the navigation dial.
3. Turn the navigation dial to Export Job, press the navigation dial.
4. Turn the navigation dial to select the Job to export, press the navigation dial. The
export destination of Control Hub Thumb Drive appears.
5. Press the navigation dial. The progress indicator will show the status.
button to capture an image. The screen will flash red for a
individual files can be exported one at a time.
select the desired video or image.
Export
Saving "PROJECTNAME".
Cancel
30
button again to end and save the video
entire folders of Jobs can be exported
, press the dial.
Exit
, press the