Publicidad
Idiomas disponibles
Idiomas disponibles
2
M18™ Wireless Monitor
2.4 Factory Reset & Firmware Updates – M18™ Wireless
Monitor
2.4.1
Factory Reset – M18™ Wireless Monitor
Performing a factory reset will reset the M18™ Wireless Monitor to the factory defaults.
On the Wireless Monitor, the functionality that will reset to the factory default will be:
• Backlight settings back to default
• Wireless Monitor /Control Hub connection settings
• System language
1. Turn the navigation dial to Settings
2. Turn the navigation dial to Factory Reset press the navigation dial to enter the sub-menu.
3. Select Factory Reset Wireless Monitor and press the navigation dial.
4. Read and acknowledge the factory reset message by selecting OK.
The factory reset is now complete, and the system is returned to the Factory Reset sub-menu.
2.4.2
Firmware Updates – M18™ Wireless Monitor
Firmware updates are periodically released to introduce new features and optimizations.
Before updating a system, go to the About section (found at the bottom of the Settings
menu) of the Settings menu and make a note of the current firmware revisions in the
system.
Screen Settings
Date & Time
Units
Feet
Language
English
System Update
Factory Reset
About
Service & Support
System information is shown in the About screen
Firmware updates are found at www.milwaukeetool.com.
, press the navigation dial.
Do you want to factory reset the Wireless
Monitor?
Cancel
Settings
System Info
Wireless Monitor Serial Number:
2019/05/10 6 FILES
Wireless Monitor Firmware Version:
Control Hub Serial Number:
Control Hub Firmware Version:
Dismiss
45
OK
1029384756
1.2.0.0
102938B553
1.2.0.1
Publicidad
