Publicidad
Idiomas disponibles
Idiomas disponibles
5.1
Assembly
Warning
Danger of accidents Loading luggage can significantly affect the handling characteristics.
–
When the topcase is fitted, the handling characteristics, as well as the cornering and braking cha-
racteristics, may change due to greater crosswind sensitivity, especially with a full load. Beware of
strong winds. Due to the changed handling characteristics, approach the permitted maximum speed
of 150 km/h slowly.
Warning
Danger of accidents Never exceed the payload of 5 kg.
–
Distribute the load evenly and secure it against slipping.
Info
When using a pressure cleaner, maintain a distance of at least half a meter from the topcase. Use a neu-
tral detergent (water with mild soap).
Tip
The locking cylinder comes with many small parts. It is recommended that you perform the assembly while
seated at a table.
Mounting the locking cylinder
–
Insert springs
E
.
501995-01
–
Insert tumblers
chambers
501996-01
–
Insert the key and check whether the tumblers with the
number 1 are correct.
All tumblers close flush with the locking cylinder.
–
Replace the non-matching tumblers with ones that have
the matching number.
Info
It is recommended that you note the numbers of
the matching tumblers so that the subsequent
500517-01
locking cylinders can be equipped immediately.
bp
(included) into chambers
bo
with the number 1 into
A
C
E
,
, and
.
ASSEMBLY 5
A
C
,
, and
9
Publicidad
