Stihl MS 150 C Manual De Instrucciones página 19

Felling Instructions
1
1 2 /
2 / 1 2
When felling, maintain a distance of at
least 2 1/2 tree lengths from the nearest
person.
When felling in the vicinity of roads,
railways and power lines, etc., take extra
precautions. Inform the police, utility
company or railway authority before
beginning to cut.
WARNING
The noise of your engine may drown any
warning call.
MS 150 C
Escape Path
1
A
First clear the tree base and work area
from interfering limbs and brush and
clean its lower portion with an ax.
Then, establish two paths of escape (B)
and remove all obstacles. These paths
should be generally opposite to the
planned direction of the fall of the tree
(A) and about at a 45° angle. Place all
tools and equipment a safe distance
away from the tree, but not on the
escape paths.
Buttress Roots
45°
If the tree has large buttress roots, cut
into the largest buttress vertically first
45°
(horizontally next) and remove the
resulting piece.
Felling Notch
Before making the felling notch, check
the desired direction of fall:
Position the saw so that the center of the
felling notch points exactly in the
direction you want the tree to fall.
English
17