KitchenAid 4KHB1231 Instrucciones página 9

OPERATING YOUR HANd BlENdER
Using the Twist lock Blending Arm
Use the Blending Arm attachment for
smoothies, milk shakes, soup, cooked
vegetables, frosting, or baby food.
1. Insert Blending Arm attachment into
motor body and twist to lock.
2. Plug the electrical cord into an electrical
wall socket.
3. Set Hand Blender on Speed 1. Adjust
the speed by turning the speed control
dial on top of the Hand Blender.
4. Insert the Hand Blender into the
mixture.
NOTE: Hand Blender should only be
immersed in liquids the length of the
attachment. Do not submerge beyond
the seam of the blending attachment.
Do not immerse the motor body into
liquids or other mixtures.
5. Press the Power button to activate
the Hand Blender.
6. When blending is complete, release
the power button before removing
Hand Blender from the mixture.
7. Unplug immediately after use, before
removing or changing attachments.
Insert Hand Blender with Blending Arm
attached into the jar containing ingredients
at an angle. Use your free hand to cover
the top of the blending jar for better
stability and avoid splattering. Remember
to stop the Hand Blender before removing
it from the jar to avoid splashing.
Blending
Rest the Hand Blender on the bottom of
the jar momentarily then hold at an angle
and slowly draw it upwards against the side
of the jar. As the Hand Blender is drawn
up you will notice the ingredients from the
bottom of the jar being drawn up. When
the ingredients are no longer being drawn
up from the bottom, return the Hand
Blender to the bottom of the jar and repeat
the process until the ingredients are at the
desired consistency.
Drawing up
Using a light circular motion from your
wrist, draw the Hand Blender up slightly
and let it fall again into the ingredients.
Allow your wrist motion and the weight
of the Hand Blender to do the work.
Wrist
movement
9