Descargar Imprimir esta página

Webasto ProCore Edge 30 Manual De Instalación, Funcionamiento Y Mantenimiento página 13

Ocultar thumbs Ver también para ProCore Edge 30:

Publicidad

Idiomas disponibles

Idiomas disponibles

IOMM
4.2 Installation Precautions
DANGER
Only authorized, trained, and qualified personnel should install and
service this charger.
Installation must be carried out only by suitably qualified personnel
and in accordance with the NEC, ANSI/NFPA 70 or equivalent,
and comply with current local and national wiring regulations.
DANGER
NEVER PLACE THE CHARGER DIRECTLY ABOVE
OR BELOW THE BATTERY BEING CHARGED.
Gases or fluids from the battery will corrode and damage the char-
ger.
WARNING
The charger is only for indoor use.
Check, before installation, that the charger has not sustained any
damage in transit. Make sure that the electrical ratings are suitable
for both the intended AC input supply and the DC output current
and voltage for the batteries to be charged. Also, ensure that the
screw terminal connector polarity is correct and matches the battery
connector polarity.
Webasto Charging Systems, Inc.
Locate the charger as far away from the battery as DC cables
permit.
Do not expose the charger to rain.
The charger should be sited in a cool, dry, and well-ventilated
location away from corrosive fumes and humid atmospheres.
An ambient temperature range of between −4°F and 113°F
must be maintained.
Ensure that ventilation is not obstructed at the left air intake and
right exhaust vents.
ProCore Edge 30 North America
13 of 68
5912995 A01

Publicidad

loading