Webasto ProCore Edge 30 Manual De Instalación, Funcionamiento Y Mantenimiento página 54

ProCore Edge 30 North America
9.1.6.2. Using a small flathead screwdriver (ideally with a 0.4 mm
x 2-mm tip and no bigger than 0. 7 mm x 3 mm), adjust the power
module position selector (Figure 33) to match the power module
position (Figure 34).
Figure 33 Power Module Position Selector
The power module positions are 1 through 10
– the Module 1 position always starts at the
top slot.
5912995 A01
Power Module
Position Selector
Webasto Charging Systems, Inc.
54 of 68
IOMM
Figure 34
Power Module
Positions
Charger
Module 1
Module 2
Module 3
Module 4
Module 5
Module 6
Module 7
Module 8
Module 9
Module 10