Webasto ProCore Edge 30 Manual De Instalación, Funcionamiento Y Mantenimiento página 21

IOMM
WARNING
RISK OF FIRE
•
•
•
4.6.1 Remove the six M5 screws on the top panel of the charger
(Figure 14) with a TORX TX25, then remove the panel.
Figure 14 Six M5 Panel Screws, Top Panel View
Webasto Charging Systems, Inc.
Use VAC input (indicated above) only on circuits with a branch
circuit protection in accordance with the NEC NFPA 70 to
reduce the risk of fire.
These circuits (maximum CB size) also are to be consistent with
the supply current (input amps) indicated in section 3 for the
respective number and voltage (48V or 80V) of fitted modules.
Ensure that the AC wiring (minimum AC input wire size [AWG]),
indicated in section 3, meet NEC requirements.
Refer to section 3 also for AC input voltage specifications
ProCore Edge 30 North America
3-Phase 480V AC
21 of 68
VAC Input
5912995 A01