Publicidad
8/12/22, 2:04 PM
Descripción
del problema
#
HW21
I think my print
platform might not
be level.
Problemas de red
Esta página describe la solución de problemas de red del controlador y la impresora que no mostrarán un error en la
pantalla del controlador/de la impresora ni en la columna de luces de la impresora.
Descripción
#
del problema
es.infocenter.3dsystems.com/figure4modular/print/book/export/html/526
Pasos para la solución de problemas por parte del cliente
If you experience print-quality issues that happen with one tray, but not with another, there
is a good chance that the platform itself might be deformed in some way. To test this, note
that Figure 4 print platforms each have a unique serial number (see below). Record all
serial numbers of your platforms keep track of which one is used on a given build. If the
print platform suspected to be deformed always has print defects, while other platforms
do not, discard the affected platform according to all government regulations. Do not
attempt to bend it back into shape.
Pasos para la solución de problemas por parte del cliente
Guía del usuario
153/182
Publicidad
