2. Features
LCD Display
Icons
Description
Operating Modes
Connected to AC mains
Connected to PV panels
Solar charger is working
Indicates the DC/AC inverter circuit is working
Indicates unit alarm is disabled: press and hold the "ESC" key for 3 seconds to enable/disable
2.4.4 On/Off/Bypass Power Switch
Mode
Bypass Mode
Unit Off
Unit On
Description
The APS will charge the batteries with Utility and/or PV input power and also provide
AC output power to the connected loads. If input power is no longer present, the APS
will shut down and cease supplying output power to the load, as well.
The APS is off and there is no AC output.
The APS will pass AC power to its output from Utility, PV or Battery power. Utility and/
or PV input power will charge batteries based on configured settings.
9