SCHUBERTH E2 Manual página 31

C. THE HELMET
12. INNER LINING
The interchangeable, washable and seamless inner linings of the E2 ensures a
secure and comfortable fit, as well as improved helmet ventilation.
The high-comfort cheek pads ensure that the helmet fits comfortably around
the cheeks, and the head pad provides an optimal fit all around the head.
The head pad sits comfortably on the head without covering the ventilation
channels.
The internal lining consists of skin-friendly materials throughout, particularly in
areas that come in contact with the head. A soft, breathable material known as
Interpower®, which is fast-drying and conducts heat efficiently is used for the
padding, as well as a special anti-bacterial low-odour fabric.
Thanks to the new SCHUBERTH individual program you have the possibility to
optimize the fit of the helmet to increase comfort. For this purpose, we offer
different head and cheek pads. For more information please visit our website
www.schuberth.com.
REMOVING THE INNER LINING
Removing the neckroll
1. Open the chin bar.
2. Undo the plastic hooks on the front
tabs of the neckroll. To do this, pull
the cheek pad slightly inside and
and press the end of the neckroll
upwards.
3. Repeat step 2 on the other side.
4. Grasp one side of the neckroll
and pull it backwards until the neckroll is
released from the fixation.
5. Loosen the piping completely and pull it
out of the fixation on the other side as well.
EN
31