Panasonic SC-PMX2 Instrucciones De Funcionamiento página 11

Using the play timer Using the play timer
You can set the play timer to come on at a certain time to
wake you up.
Preparation
Turn the unit on and set the clock.
Prepare the music source you want to listen to; disc, radio,
USB, option port or music port source, and set the volume.
Press [CLOCK/TIMER] repeatedly to select play
1
timer.
CLOCK
Original display
Within 5 seconds, press [ /4/1] or [ /¡/¢]
2
to set the starting time.
3 Press [CLOCK/TIMER] to confirm.
4 Repeat steps 2 and 3 to set the finishing time.
To activate the timer
5 Press [˚PLAY] to turn on the timer.
"˚PLAY" is displayed.
Press [y] to turn off the unit.
6
The unit must be off for the timer to operate.
To Action
change the settings Repeat steps 1 to 4 and 6.
change the source 1) Press [
or volume
indicator from the display.
2) Make changes to the source or volume.
3) Perform steps 5 and 6.
check the settings Press [CLOCK/TIMER] repeatedly to select
˚
(when the unit is on
PLAY.
or in standby mode)
cancel Press [˚PLAY] to clear the timer indicator
from the display.
Note
• The play timer will start at the preset time, with the volume
increasing gradually to the preset level.
• The timer comes on at the set time every day if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while a timer is functioning, the
fi nish time setting will not be activated.
• If MUSIC PORT or option port is selected as the source when the
timer comes on, the system turns on and engages MUSIC PORT or
option port as the source. If you wish to playback from the portable
audio equipment, activate the equipment's play mode and increase
the volume. (See the portable audio equipment's instruction
manual.)
˚ PLAY
Start time
Play timer indicator
Finish time
˚
PLAY] to clear the timer
Sound adjustment
Selecting sound effects Selecting sound effects
You can change the sound effect by selecting Preset EQ or
adjusting the bass or treble effect.
Preset EQ Preset EQ
Press [PRESET EQ] repeatedly to select your desired
setting.
Setting Effect
HEAVY Adds punch to rock
CLEAR Clarifi es higher frequencies
SOFT For background music
VOCAL Adds gloss to vocal
EQ-OFF No effect
Bass or treble Bass or treble
Enables you to enjoy the lower or higher pitch sound.
Press [BASS] or [TREBLE] to select your desired
1
setting.
Setting Effect
BASS For lower pitch sound
TREBLE For higher pitch sound
2 Press [5] or [∞] to adjust the level.
OR
To adjust bass or treble using the main unit.
Turn [BASS] or [TREBLE] to adjust the level.
Note
The tone level can be varied within -4 to +4.
Enjoying surround sound Enjoying surround sound
Enables you to add natural width and depth to the stereo
sound.
To activate
Press [SURROUND] to display "
To cancel
Press [SURROUND] again to clear "
indicator.
Note
• Surround sound is less discernible when listening through
headphones.
• If interference in FM stereo reception increases, cancel the surround
sound effect.
Enchacing the bass Enchacing the bass
Enables you to enjoy the powerful bass effect.
Press [H.BASS] repeatedly to select your desired
setting.
LEVEL 1 → LEVEL 2 → OFF
Note
The actual effect depends on the disc.
" indicator.
"
11
11