Panasonic SC-PMX2 Instrucciones De Funcionamiento página 12

External unit
Connecting and playing a USB mass Connecting and playing a USB mass
storage class device storage class device
MP3
The USB connectivity enables you to connect and play MP3
tracks from USB mass storage class. Typically, USB memory
devices. (Bulk only transfer)
Preparation
Before connecting any USB mass storage device to the unit,
ensure that the data stored therein has been backed up.
It is not recommended to use a USB extension cable. The
USB device is not recognised by this unit.
USB enabled device
(not included)
It is not recommended to use a
USB extension cable. The device
connected via the cable will not be
recognised by this unit.
1 Slide open the USB jack cover.
2 Reduce the volume and connect the USB mass
storage device.
Press [USB 6] to start play.
3
12
12
To
pause play
stop play
skip track
Numeric
skip album
buttons
For other operating functions, they are similar as those
described in "Discs" ( ➡ page 7 and 8).
Note
You can program up to 12 tracks for USB program play function.
Compatible devices Compatible devices
Devices which are defi ned as USB mass storage class:
• USB devices that support bulk only transfer.
• USB devices that support USB 2.0 full speed.
Supported format Supported format
Files must have the extension ".mp3" or ".MP3".
Note
• CBI (Control/Bulk/Interrupt) is not supported.
• A device using NTFS fi le system is not supported [Only FAT 16/32
(File Allocation Table 16/32) fi le system is supported].
• Depending on the sector size, some fi les may not work.
• This unit can access up to 255 albums (including blank folders) and
2500 tracks.
• The maximum number of tracks in a folder are 999 tracks.
• Only one memory card will be selected when connecting a multiport
USB card reader. Typically the fi rst memory card inserted.
• Do not unplug the USB device during reading or playback.
• Disconnect the USB card reader from the unit when you remove
the memory card. Failure to do so may cause malfunction to the
device.
• When you connect to a compatible digital audio player to the USB
jack, charging may be activated. It will not charge when the unit is
switch to standby mode or during option port charging.
Action
Press [USB 6].
Press again to resume play.
Press [7].
"RESUME" is displayed. The position is
memorized.
Press [USB 6] to resume.
Press [7] again to clear the position.
Press [ /4/1] or [ /¡/¢].
Press [ALBUM or ] in the play mode.
Press [ALBUM or ] once and then
the numeric buttons in the stop mode.