Parkside PKSA 40-Li B2 Traduccion Del Manual De Instrucciones Originale página 35

8 Chain catch
9 Oil tank cover
10 Oil level indicator
11 Mounting screw for the sprocket
cover
12 Screw for the chain
quick-tensioning system
13 Sprocket cover
14 Rear hand protection
15 Blade encasing
16 Rechargeable battery
16a Battery release button
17 Charger
18 Oil bottle
19 Coach screw
19a Pin
20 Chain sprocket
21 Chain tensioner pin
22 Chain tensioner pin holder
23 Guide rails for battery
24 Battery charge level indicator
25 Chain speed indicator high/low
26 On/Off button
27 High/Low button
28 Oil passage
Safety functions
1 Rear grip with hand guard (14)
Protects the hand against branches and
boughs in the case of springing away
by the chain.
2 On-off switch with safety chain
brake
­ On­releasing­the­On/Off­switch,­the­
device immediately switches off.
3 Switch-on block
The switch-on block must be released
for switching on the device.
5 Chain braking lever/hand guard
­ Control­system,­which­stops­the­saw­
chain immediately in case of a spring-
back; lever can also be activated
manually; protects the left hand of the
operator if it slides from the front grip.
6 Saw chain with small spring-
back
helps you to catch spring-backs with
specially developed control systems.
8 Metal stop claw
Reinforces the stability when vertical
cuts are carried out and facilitates
sawing.
Technical Data
Cordless chainsaw ...PKSA 40-Li B2
Rated input voltage ... 40 V
Motor current I ................................16 A
Protection category...........................IPX0
Chain speed v ........... 15 m/s or 20 m/s
0
Weight­­(without­saw­chain,­
blade­bar,­bade­encasing,­oil,­
rechargeable­batteries) ... approx.­3,04­kg
Oiltank ...................................... 180 ml
Chain bar ....... Trilink M1431656-1041TL
Chain ......................... Trilink CL14356TL
Chain pitch .................. 3/8"­(9,5­mm)
Chain link separation ............... 10 mm
Chain width ........................... 1,1­mm
Teeth of the sprocket chain wheel ....... 6
Length of the chain bar . approx. 456 mm
Sawing length .............. approx. 380 mm
Temperature..........................max.­50 °C
Operation ......................... -20­-­50 °C
Storage ................................ 0­-­45 °C
Acoustic pressure level
) ................82,3­dB(A);­K
(L
pA
Sound power level (L
measured ....102,3dB(A);­K
guaranteed .........................105­dB(A)
)­at­the
Vibration (a
h
Front handle .... 1,25­m/s
Rear handle..... 1,76­m/s
Type of battery ............................... Li-Ion
GB IE
;­(2­x­20­V)­
=­3,0­dB
pA
)
WA
=­2,37­dB
WA
;­K=­1,5­m/s
2
;­K=­1,5­m/s
2
35
2
2