Parkside PKSA 40-Li B2 Traduccion Del Manual De Instrucciones Originale página 53

Maintenance intervals
Regularly carry out the maintenance operations listed in the following table.
The life of the saw is extended by regular maintenance of your chainsaw.
Furthermore,­you­get­optimum­cutting­performance­and­avoid­accidents.
Maintenance Interval Table
Machine part
Components of
the chain brake
Sprocket chain
wheel­(20)
Saw chain­(6)
Guide bar­(7)
Guide bar­(7)
Automatic oil
system
Oiling the saw chain
Clean and oil the chain regularly.
In­this­way,­you­keep­the­chain­
sharp and get optimum machine
performance. In case of damage
due to inadequate maintenance of
the­saw­chain,­the­guarantee­claim­
is invalid. Remove the batteries
and use cut-resistant gloves when
working with the chain or with the
blade.
•­ Oil­the­chain­after­cleaning,­after­10­
hours­of­use­or­at­least­once­weekly,­
depending­on­which­comes­first.
•­ Before­oiling,­the­chain­bar­must­be­
cleaned­thoroughly,­in­particular­the­
teeth of the rail. Use a whisk and a dry
cloth for that.
Action
Check,­replace­if­required
Check­for­wear/indentations,­
replace if necessary
Check­oil,­regrind­or­replace­
if required
Check,­clean and oil
Turn around
Check,­clean­oil­aperture­if­
necessary
Before every
use





•­ Oil­the­individual­chain­links­with­the­
aid of an oil suction gun with pinpoint
tip­(available­in­the­specialist­trade).­
Place individual oil drops onto the ar-
ticulated links and onto the tooth tips of
the individual chain links.
Sharpening the saw chain
An incorrectly sharpened
saw chain increases the dan-
ger of spring-back!
Use cut-protection gloves
when you are handling the
chain or the chain bar.
A sharp chain guarantees an op-
timal cutting performance. It eats
effortlessly through the wood and
leaves­large,­long­wooden­chips.­
GB IE
After 10 hours
of operation

53