Parkside PKSA 40-Li B2 Traduccion Del Manual De Instrucciones Originale página 43

if proper precautions are taken. Do not
let go of the chain saw.
b)­ Do not overreach and do not cut
above shoulder height. This helps
prevent unintended tip contact and
enables better control of the chain saw
in unexpected situations.
c)­ Only use replacement bars and
chains specified by the manu-
facturer. Incorrect replacement bars
and chains may cause chain breakage
and/or kickback.
d)­ Follow the manufacturer´s
sharpening and maintenance
instructions for the saw chain.
Decreasing the depth gauge height can
lead to increased kickback.
e)­­ Follow all instructions when clea-
ring the chainsaw of accumulated
material, storing or performing
maintenance. Make sure the
switch is turned off and the batte-
ry is removed.Unexpected operation
of the chainsaw when removing ac-
cumulated material or during mainte-
nance can result in serious injury.
Further safety directions
•­­ Comply­carefully­with­maintenance,­
control and service instructions in this
manual.
Damaged protective devices and parts
have to be repared or changed except
as noted otherwise in this manual.
•­ It­is­recommended­that­a­first-time­user­
at least practice the cutting of logs on a
saw log or frame.
•­ For­sowing­work­on­hillsides,­always­
stand in the area above the log.
To keep total control while sawing
through,­reduce­the­pressure­at­the­end­
of the cut without loosening your grip
on the handles of the electric chain
saw. Make sure the saw chain does
not­touch­the­ground.­After­finishing­
the­cut,­wait­until­the­electric­chain­saw­
comes to a halt before removing it. Al-
ways shut off the engine of the electric
chain saw before switching between
trees.
•­ Dirt,­stones,­loose­bark,­nails,­clips­and­
wires must be removed from the tree.
• Do not use any accessories
that are not recommended by
PARKSIDE. This can result in electric
shock­or­fire.­
Residual risks
Even­if­properly­operating­and­handling­
this­electric­tool,­some­residual­risks­will­
remain.­Due­to­its­construction­and­build,­
this electric tool may present the following
hazards:
a)­ Cuts
b)­ Ear­damage­if­working­without­
ear protection.
c)­ Damage­to­your­health­caused­by­
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
­ Warning!­During­operation,­this­
electric tool generates an electro-
magnetic­field­which,­under­certain­
circumstances,­may­impair­the­
functionality of active or passive
medical implants. To reduce the risk
of­serious­or­lethal­injuries,­we­rec-
ommend that persons with medical
implants consult their doctor and
the manufacturer of their medical
implant before operating the ma-
GB IE
43