Publicidad
Idiomas disponibles
Idiomas disponibles
GB
MT
Trouble shooting
Problem
Possible cause
ON / OFF switch (3) is turned
off
Washer
Damaged power
is not
supply cable (7)
operating
Mains fault
Washer
does not
Air trapped in the pressure
transport
washer
water
Air trapped in the pressure
Washer
washer
does not ge-
nerate any
Drop in the water mains
pressure
pressure
28
Remedy
Check ON / OFF switch.
Check power supply cable (7) for
damage. If necessary have the power
supply cable replaced by a qualified
electrician.
Check the electrical system for conformi-
ty with the data on the rating plate.
Switch on the equipment and pull the
lever of the gun (13).
Bleed the equipment, see steps 6. - 9.
Turn on the washer with high-pressure
hose until bubble-free water flows out of
the high-pressure connection (9).
Check the water mains.
Publicidad
