Displaying And Deleting Measurements - Beurer BC 81 Manual De Instrucciones

Measurement classification
In accordance with the guidelines/definitions of the
WHO and the latest findings, measurements can be
classified and assessed according to the following
table.
These standard values serve only as a general guide-
line, as the individual blood pressure varies in differ-
ent people and different age groups, etc.
Consult your doctor regularly for advice. Your doctor
will tell you your normal blood pressure as well as the
value above which your blood pressure is classified
as dangerous.
The bar chart on the display and the scale on the unit
show which category the recorded blood pressure
values fall into. If the values of systolic and diastolic
fall into two different categories (e.g. systolic in the
high normal category and diastolic in the normal cat-
egory), the classification on the device always shows
the higher category; in this case high normal.
7. Displaying and deleting
measurements
User memory
Every successful measurement is stored with the date
and time. If there are more than 60 measurements,
the oldest measurements are deleted.
• To access memory recall mode, press the M1
or M2 memory button to
select your desired user
memory ( ).
• To view the measure-
ments for user memory
1, press M1.
• To view the measure-
ments for user memory
2, press M2.
The last measurement will appear on the LCD Display.
24