Mounting Of The In-Ceiling Housing - Eneo VKCD-1311FM/VF Instrucciones De Manejo

3. Mounting of the In-Ceiling Housing

Wall and ceiling mount
1
Stick the guide pattern on the wall
or ceiling
2
Drill four holes according to the
guide pattern then insert anchors
into the drilled holes
3
Fix the housing by screws on the
ceiling.
4
Draw out power / video wires to
the connecting places. If necessary,
seal the cable outlet at the housing
with silicone.
5
Connect the dome base to the
surface mount bracket by screws.
6
Adjust desired focus and scene
by turning and moving the 3-axis
camera bracket by hand.
7
Fix the dome cover on the base by
torx wrench key.
Ceiling
19
Dome base
Tapping screw
Dome cover
Torx wrench key