Removing The Maxi-Cosi Axiss From The Car; Adjusting The Height Of The Shoulder Belts; Placing The Child Into The Car Seat; Removing The Child From The Car Seat - Maxi-Cosi Axiss Instrucciones De Uso

4 REMOVING THE MAXI-COSI AXISS
FROM THE CAR
(Fig. 15 - 17)
1. Simultaneously open the handle (a) and rotate the seat
shell (b) towards you.
2. (a) Push the button inwards (1) whilst simultaneously
rotating the handle of the belt guide downwards. Keep the
button pushed in (1) and pull the belt (2) to unwind it from
the guide. Remove the belt from the spindle (c).
IMPORTANT: the belt can only be released if the handle
is rotated fully downwards.
3. Release the seat belt buckle (a), and remove the seat belt
from the upper belt guide (b) and the lower belt guides on
the car seat's base.
IMPORTANT: Even when the car seat is not occupied
by a child, it should still be secured into the car according
to the instructions. Car seats that are incorrectly secured
can pose a danger to fellow passengers. In the event of
collision, an insecure car seat can pose danger to life.
5 ADJUSTING THE HEIGHT OF THE
SHOULDER BELTS
The belt system should be adjusted according
to the height of the child.
* The shoulder belts of the harness should be adjusted so that
they are level with the child's shoulders (see diagram).
(Fig. 18 - 21)
1. Tilt the headrest forwards.
2. Adjust the headrest upwards or downwards depending
on the child's body length.
3. When the headrest is in the desired position, press it back
to lock it into position.
6 PLACING THE CHILD INTO THE CAR
SEAT
(Fig. 22 - 26)
1. Push the adjuster button (a) and simultaneously pull the
shoulder belts (b) to loosen the belt system (make sure
to pull the belts and not the belt pads).
2. To make placing the child into the car seat easier, use the
handy belt hooks on the sides of the car seat (a). Before
placing the child into the seat, fix the shoulder belts to
the hooks.
12
3. Place the child into the car seat, then remove the belts
from the hooks.
4. Slide the buckle sections (a) + (b) together and place
them into the buckle until you hear a clear "click" sound.
5. Pull on the adjustable belt and then pull the whole belt
system tight.
Note: Do not leave more than one finger's width of
-
space between the child and the belt system.
- Note: The belts should be pulled extremely tight. Slack
of just one finger's width will make it virtually impossible
for the child to free his/her arms from underneath the
shoulder belts.
7 REMOVING THE CHILD FROM THE
CAR SEAT
(Fig. 27 - 28)
1. Push the adjuster button (a) and simultaneously pull the
shoulder belts (b) to loosen the belt system (make sure
to pull the belts and not the belt pads).
2. Push the red button on the buckle and open the belt
system. Fix the shoulder belts to the hooks.
8 ADJUSTING THE SITTING AND
SLEEPING POSITION
(Fig. 29)
Adjusting the car seat
The Maxi-Cosi Axiss can be adjusted to 8 different
positions from sitting to semi-reclining
- Push the button on the front of the seat shell and
simultaneously adjust the position of the seat backwards
or forwards to the desired sitting/reclining position.
Release the button to lock the seat shell into the desired
position.