Advanced Operations - Pioneer DJM-2000NXS Manual De Instrucciones

 Adjusting the sound quality
Turn the [MIC] channels' [EQ (HI, LOW)] controls.
Refer to Specifications on page 31 for the range of sound that can be
adjusted by each control.
Switching between monaural and stereo
audio
This switches the sound output from the [MASTER1], [MASTER2],
[BOOTH], [REC OUT], [PHONES], [DIGITAL OUT] and [USB] terminals
between monaural and stereo.
Switch the [MONO, STEREO] selector switch.
— [MONO]: Outputs monaural audio.
— [STEREO]: Outputs stereo audio.
 Adjusting the L/R balance of audio
The left/right balance of the sound output from the [MASTER1],
[MASTER2], [BOOTH], [REC OUT], [PHONES], [DIGITAL OUT] and
[USB] terminals can be adjusted.
1 Set the [MONO, STEREO] selector switch to [STEREO].
2 Turn the [BALANCE] control.
The sound's left/right balance changes according to the direction in
which the [BALANCE] control is turned and its position.
! Rotating to the rightmost position outputs only the right sound of
stereo audio. Rotating to the leftmost position outputs only the left
sound of stereo audio.
Audio is output from the [BOOTH]
terminal
Turn the [BOOTH MONITOR] control.
Adjusts the level of audio signals output from the [BOOTH] terminal.
14
En

Advanced Operations

About PRO DJ LINK
When a PRO DJ LINK-compatible Pioneer DJ player (CDJ-2000, CDJ-900
etc.), a computer on which rekordbox is installed and this unit are con-
nected by LAN cable, the PRO DJ LINK functions below can be used.
For more details on the PRO DJ LINK function, also refer to the DJ play-
er's handling instructions and rekordbox's operating instructions.
For instructions on connections, see Connecting input terminals on page
7.
! Up to four DJ players can be connected. Up to two computers can be
connected.
! Connect the DJ players to the [LINK] terminal ([CH1] to [CH4]) with
the same number as the channel to which the audio cables are
connected.
! Connect the computers to the [COMPUTER 1] or [COMPUTER 2]
terminal.
 SD & USB Export
rekordbox music files and management data on an SD memory card or
USB device connected to a Pioneer DJ player supporting PRO DJ LINK
(e.g. CDJ-2000nexus, CDJ-2000, CDJ-900) can be transferred between DJ
players via this unit.
 rekordbox LINK Export
This function lets you transfer rekordbox music files and management
data directly, eliminating the bother of exporting the data to an SD
memory card/USB device.
 SYNC MASTER
The beats (tempos and beat positions) of CDJ-2000nexus tracks can be
played in sync with this unit's master clock for up to four units. The beats
of the tracks can be managed collectively on the mixer, allowing you to
concentrate on the performance (mixing, effects, etc.).
 LIVE SAMPLER
The sound input to the [MIC] terminal or output from the [MASTER]
terminals can be sampled and played on a DJ player.
 LINK MONITOR
With this function, rekordbox music files stored on the computer can be
quickly monitored over the headphones.
 STATUS INFORMATION
This function informs the DJ players of the connected channel status
(on-air status, channel number, etc.).
 QUANTIZE function
Based on the GRID information of tracks that have been analyzed with
rekordbox, effects can be added to the sound without getting out of
tempo with the currently playing track.
QUANTIZE
Music files must be analyzed ahead of time with rekordbox in order to
use the QUANTIZE function. For instructions on analyzing music files
with rekordbox, see the rekordbox Operating Instructions.
! The QUANTIZE function cannot be used when [REVERB], [GATE] or
[SEND/RETURN] is selected.
! To use the QUANTIZE function, set the BPM measurement mode to
AUTO.
! Before using in combination with a CDJ-2000 or CDJ-900, update the
DJ player's firmware to version 4.0 or later.