Specifications; Input / Output Terminals - Pioneer DJM-2000NXS Manual De Instrucciones

Specifications

General
Power requirements .................................... AC 110 V to 240 V, 50 Hz/60 Hz
Power consumption ............................................................................... 42 W
Power consumption (standby) ............................................................. 0.4 W
Main unit weight ................................................................................... 8.6 kg
External dimensions .............. 430 mm (W) × 107.9 mm (H) × 404 mm (D)
Tolerable operating temperature ........................................ +5 °C to +35 °C
Tolerable operating humidity ...................... 5 % to 85 % (no condensation)
Audio Section
Sampling rate ......................................................................................96 kHz
A/D, D/A converter ...............................................................................24 bits
Frequency characteristic
CD/LINE/MIC ................................................................... 20 Hz to 20 kHz
S/N ratio (rated output)
PHONO............................................................................................ 93 dB
CD/DIGITAL, LINE ........................................................................ 107 dB
MIC .................................................................................................. 85 dB
Total harmonic distortion (LINE — MASTER1) ................................0.004 %
Standard input level / Input impedance
PHONO............................................................................. –52 dBu/47 kW
CD/LINE ............................................................................ –12 dBu/47 kW
MIC .................................................................................. –52 dBu/8.5 kW
RETURN ............................................................................ –12 dBu/49 kW
Standard output level / Load impedance / Output impedance
MASTER1 .................................................... +8 dBu/10 kW/3 W or lower
MASTER2 .................................................. +2 dBu/10 kW/22 W or lower
REC OUT .....................................................–8 dBu/10 kW/22 W or lower
BOOTH ...................................................... +8 dBu/10 kW/1 kW or lower
SEND .........................................................–12 dBu/10 kW/1 kW or lower
PHONES ..................................................... +8.5 dBu/32 W/1 W or lower
Rated output level / Load impedance
MASTER1 ........................................................................+26 dBu/10 kW
MASTER2 ........................................................................+20 dBu/10 kW
Crosstalk (LINE) .................................................................................... 82 dB
Channel equalizer characteristic
HI .....................................................................–26 dB to +6 dB (13 kHz)
MID ....................................................................–26 dB to +6 dB (1 kHz)
LOW ..................................................................–26 dB to +6 dB (70 Hz)
Microphone equalizer characteristic
HI ...................................................................–12 dB to +12 dB (10 kHz)
LOW ..............................................................–12 dB to +12 dB (100 Hz)

Input / Output terminals

PHONO input terminal
RCA pin jack .................................................................................... 2 sets
CD input terminal
RCA pin jacks .................................................................................. 4 sets
LINE input terminal
RCA pin jack .................................................................................... 2 sets
MIC input terminal
XLR connector/phone jack (Ø 6.3 mm) ........................................... 1 set
RETURN Input terminals
Phone jack (Ø 6.3 mm) ..................................................................... 1 set
DIGITAL IN coaxial input terminal
RCA pin jacks .................................................................................. 4 sets
MASTER output terminal
XLR connector................................................................................... 1 set
RCA pin jacks .................................................................................... 1 set
BOOTH output terminal
Phone jack (Ø 6.3 mm) ..................................................................... 1 set
REC OUT output terminal
RCA pin jacks .................................................................................... 1 set
SEND output terminal
Phone jack (Ø 6.3 mm) ..................................................................... 1 set
DIGITAL OUT coaxial output terminal
RCA pin jacks .................................................................................... 1 set
MIDI OUT terminal
5P DIN ............................................................................................... 1 set
PHONES output terminal
Stereo phone jack (Ø 6.3 mm) ......................................................... 1 set
USB terminal
B type .................................................................................................1 set
CONTROL terminal
Mini phone jack (Ø 3.5 mm) ........................................................... 2 sets
LINK terminal
LAN terminal (100Base-TX) ............................................................ 6 sets
— The specifications and design of this product are subject to
change without notice.
— Be sure to use the [MASTER1] terminals only for a balanced
output. Connection with an unbalanced input (such as RCA)
using an XLR to RCA converter cable (or converter adapter), etc.,
may lower the sound quality and/or result in noise.
For connection with an unbalanced input (such as RCA), use the
[MASTER2] terminals.
! © 2012 PIONEER CORPORATION. All rights reserved.
31
En