Siemens CT918L1D0 Manual De Usuario página 53

If your appliance has not been
¡
used for a long time, for example if
you were on holiday, you should
rinse the water filter before use by
dispensing a cup of hot water.
The water filter can be purchased
¡
from retailers or customer service.
→ "Accessories", Page 51
7.4 Performing initial start-up
After connecting the appliance to the
power supply, configure the settings
for initial start-up. Initial start-up only
appears when switching on for the
first time.
Open the appliance door.
1.
Set the mains switch to ⁠ .
2.
24
→ Fig.
Close the appliance door.
3.
Press to switch the appliance on
4.
and wait until the appliance has
rinsed.
Follow the instructions on the dis-
5.
play.
The display will guide you through
a
the programme.
Tip: To call up brief information,
press ⁠ .
Notes
If you want to set up Home Con-
¡
nect now, follow the instructions in
the Home Connect app.
→ "Setting up Home Connect",
Page 58
If "Demo mode" is selected, only
¡
the displays will work. You cannot
dispense a beverage or run a pro-
gramme.
7.5 General information
Please bear this information in mind
so that you can get the best out of
your appliance.
Notes
The appliance has been pro-
¡
grammed at the factory with stand-
ard settings for optimum operation.
The integrated fan switches on
¡
each time a beverage is dispensed
and switches off again after
around 5-7 minutes.
The grinder has been factory-set
¡
for optimum operation. If coffee is
only dispensed drop by drop or is
too thin and with too little crema,
you can adjust the grinding level.
→ "Setting the grinding level",
Page 55
If you do not perform any actions
¡
on the appliance for a certain
period, it will switch off automatic-
ally. You can change the duration
in the basic settings.
The first beverage will not yet have
¡
its full aroma if:
– You are using the appliance for
the first time.
– You have run a service pro-
gramme.
– You have not used the appli-
ance for a long time.
Do not drink the beverage.
8 Basic operation
ope r a t i o n
ope r a t i o n
8.1 Switching the appliance
on or off
Notes
Do not press the power switch
¡
while the appliance is operating.
Before switching off the power
¡
switch, switch the appliance off
with . This is the only way for the
appliance to rinse automatically.
▶ Press ⁠ .
operation en
53