Siemens CT918L1D0 Manual De Usuario página 48

en Preventing
2 Preventing material
Pr e v e nt i n g
damage
Pr e v e nt i n g
ATTENTION!
Risk of damage to the appliance. If
the appliance is not started up cor-
rectly, it may be damaged.
▶
Use the appliance in frost-free
rooms only.
▶
If the appliance has been transpor-
ted or stored below 0 °C, wait
3 hours at room temperature be-
fore starting it up.
▶
After plugging in, always wait ap-
prox. 5 seconds.
Improper installation may cause ma-
terial damage.
▶
Observe the installation instruc-
tions for the appliance installed
above or below.
▶
When installing the appliance
above a warming drawer, observe
a niche height of 590 mm.
▶
The connection to the domestic
water supply and all equipment
and devices used to supply water
to the appliance must comply with
the applicable provisions of the re-
spective country.
▶
Only trained specialist personnel
may carry out the fixed water con-
nection.
▶
Connect the appliance to a cold
water pipe only.
▶
The water quality must comply with
the drinking water regulations of
the individual country in which the
appliance is operated.
▶
Water circulation must be guaran-
teed.
▶
Ensure that the water pressure in
the water supply system is at least
50 kPa (0.5 bar) and max.
1000 kPa (10 bar).
48
▶
If the water pressure exceeds the
maximum value indicated, install a
pressure-reducing valve between
the fixed water connection and the
hose set of the appliance.
Unsecured units may fall over.
▶
Secure units to the wall using a
standard bracket.
3 Environmental protec-
tion and saving energy
3.1 Disposing of packaging
The packaging materials are environ-
mentally compatible and can be re-
cycled.
▶ Sort the individual components by
type and dispose of them separ-
ately.
3.2 Tips for saving energy
If you follow these instructions, your
appliance will use less power.
Set the interval for automatic switch-
off to the smallest value.
a If the appliance is not being used,
it will switch itself off earlier.
→ "Basic settings", Page 59
Do not interrupt the dispensing pro-
cess prematurely.
a The amount of water or milk that is
heated is used optimally.
Descale the appliance regularly.
a Limescale deposits increase the
appliance's energy consumption.