WERKU WK501400 Instrucciones Originales página 4

ENG
ORIGINAL
hydraulic equipments
hydraulic equipments, accessories and tool
tips, etc. according to these instructions and in
the manner provided for the particular type of
gasoline airless hydraulic equipment, taking into
account the conditions work and work to develop
►
The use of the gasoline airless hydraulic
equipment for applications other than those
intended could result in a dangerous situation
►
Please check your gasoline airless hydraulic
equipment serviced by a Werku
service using only identical replacement parts
►
This will ensure the safety of the gasoline
airless hydraulic equipment is maintained.
CHECK THE GOOD CONDITION OF THE
GASOLINE AIRLESS HYDRAULIC EQUIPMENT.
►
Make sure that all the screws in the gasoline
airless hydraulic equipment are perfectly
►
tightened In cold climates or when the gasoline
airless hydraulic equipment has not been used
for a period, allow the gasoline airless hydraulic
equipment to warm up by leaving it to run empty
for a few minutes, to ensure that all internal
components are perfectly lubricated
sure that the possible installed accessories are
perfectly fitted in place.
BEFORE STARTING WORK.
►
Make sure that the gasoline airless hydraulic
equipment is firmly supported before using
►
Check that no one is standing beneath you
when using the gasoline airless hydraulic
equipment in high areas
away from all moving parts of the gasoline airless
hydraulic equipment.
DURING THE OPERATION.
►
Do not leave the gasoline airless hydraulic
equipment operating without having it firmly fixed
►
Only turn it on when you are sure you have full
►
control over it Do not point the gasoline airless
hydraulic equipment at anyone while in use
operating the gasoline airless hydraulic equipment
will produce vibrations
come loose, and possibly cause faults or accidents
►
Keep your hands away from all moving parts of
the gasoline airless hydraulic equipment.
►
Use gasoline airless
official repair
®
►
Make
►
Keep your hands
►
►
The screws may gradually
AT FINISH WORKING.
►
Do not touch the possible accessories installed
in the gasoline airless hydraulic equipment after
►
use It may be hot and cause burns
materials worked with may contain chemicals
or toxic components
substances or allowing them to come into contact
with your skin
and protect against incidents of this kind.
HIGH-PRESSURE HOSE SAFETY
PRECAUTIONS.
►
Attention, danger of injury by injection!
and tear and kinks as well as usage that is not
appropriate to the purpose of the device can
cause leakages to form in the high-pressure hose
►
Liquid can be injected into the skin through a
►
leakage
thoroughly before they are used
any damaged high-pressure hose immediately
►
Never repair defective high-pressure hoses
►
yourself!
smallest bending radius is about 20 cm
not drive over the high-pressure hose
against sharp objects and edges
the high-pressure hose to move the device
not twist the high-pressure hose
high-pressure hose into solvents
cloth to wipe down the outside of the hose
the high-pressure hose in such a way as to ensure
that it cannot be tripped over
charging of spray guns and the high-pressure
hose is discharged through the high-pressure
►
hose For this reason the electric resistance
between the connections of the high-pressure
hose must be equal or lower than 197 kΩ/m.
AIRLESS GUN SAFETY PRECAUTIONS.
►
Be safety-conscious
regulations governing ventilation, fire prevention,
and operation must be observed
Injection injury
When produced by this airless gun can pierce the
skin and underlying tissues, leading to serious
injury and possible amputation
an injection injury as a simple cut
can lead to amputation
immediately
English 4
►
Avoid inhaling these
►
Use PPE designed to prevent
High-pressure hoses must be checked
Avoid sharp bends and folds: the
►
Electrostatic
►
All local and national
►
A high pressure stream
►
See a physician
►
Inform the physician of the type
►
Some
►
Wear
►
Replace
►
Do
►
Protect
►
Never pull on
►
Do
►
Do not put the
►
Use only a wet
►
Lay
►
Hazard:
►
Do not treat
►
Injection