Installation - Bicycle Handlebar; Shield Installation - Solo 142 Manual De Instrucciones

5.1 Installation - Bicycle handlebar

Fig. 2
• The r.h. side of handle should be fitted as near as
possible to the handle support.
Note: You will have achieved an optimum
adjustment, if the centre of the power tool is at the
centre of your body. Your elbow should be slightly
angled in operating position.
Important: Always lead the brushcutter with the
bicycle handlebar on the r.h. side of the body!

5.2 Shield installation

Fig. 3a
M5 x 16 mm
5 x 40 mm
5 x 25 mm
M5 x 40 mm
Preparing the equipment for use
Fig. 3b
M5 x 16 mm
Fig. 4a
5 x 25 mm
Fig. 4b
Fig. 4c
M5 x 40 mm
5 x 25 mm
5 x 40 mm
ENGLISH 9