Effect Parameters - Pioneer DJM-700-S Manual De Instrucciones

EFFECT FUNCTIONS

EFFECT PARAMETERS

Beat Effect (*1)
Name Beat Switch Parameter
1 DELAY Sets delay time of 1/8 to 16/1
per 1 beat of BPM time.
2 ECHO (*2) Sets delay time of 1/8 to 16/1
per 1 beat of BPM time.
3 TRANS
Sets cut time of 1/16 to 16/1
per 1 beat of BPM time.
4 FILTER
Cycle of cutoff frequency shift
is set in unit of 1/4 to 64/1
relative to 1 beat of BPM.
5 FLANGER Cycle of flanger shift is set in
units of 1/4 to 64/1 relative to
1 beat of BPM.
6 PHASER Cycle of phaser effect shift is
set in units of 1/4 to 64/1
relative to 1 beat of BPM.
7 REVERB (*2) Amount of reverberation is set
from 1 % to 100 %.
8 ROBOT Sets pitch of robot sound
effect within range of –100 %
to +100 %.
9 CRUSH Cycle of crush effect
movement is set to 1/4 to 64/1
relative to a single beat of
BPM.
10 ROLL (*2) Effect time is set as 1/16 to 16/1
relative of 1 beat of BPM.
11 REVERSE
Effect time is set as 1/16 to 16/1
ROLL (*2)
relative of 1 beat of BPM.
12 UP ROLL (*2) Effect time is set as 1/16 to 16/1
relative of 1 beat of BPM.
13 DOWN ROLL Effect time is set as 1/16 to 16/1
(*2) relative of 1 beat of BPM.
14 SEND/
—
RETURN
(*1) When the effect channel selector is set to [CF.A], [CF.B], or [MASTER], even if the effect monitor is turned ON, if the selected channel's
sound is not output to the master output, the effect sound will not be heard.
(*2) When effect is disabled (OFF), the effect sound will not be heard, even if monitor is set to effector.
20
En
Parameter 1 (TIME dial)
Contents Setting Range (unit)
Sets delay time. 1 to 4 000 (ms)
Sets delay time. 1 to 4 000 (ms)
Sets effect time. 10 to 16 000 (ms)
Sets cycle for cutoff 10 to 32 000 (ms)
time shift.
Sets cycle for 10 to 32 000 (ms)
flanger effect shift.
Sets cycle for phase 10 to 32 000 (ms)
effect shift.
Sets amount of 1 to 100 (%)
reverberation effect.
Sets pitch of robot –100 to +100 (%)
sound effect.
Sets cycle for crush 10 to 32 000 (ms)
effect shift.
Sets effect time. 1 to 4 000 (ms)
Sets effect time. 1 to 4 000 (ms)
Sets effect time. 1 to 4 000 (ms)
Sets effect time. 1 to 4 000 (ms)
— —
Parameter 2
(LEVEL/DEPTH dial) contents
Sets balance between original and
delay sound.
Sets balance between original sound
and echo sound.
Sets balance between original sound
and effect sound.
Amount of effect increases when
dial is turned clockwise.
Amount of effect increases when
dial is turned clockwise. When dial is
turned fully counterclockwise, only
original sound is output.
Amount of effect increases when
dial is turned clockwise. When dial is
turned fully counterclockwise, only
original sound is output.
Sets balance between original sound
and effect sound.
Amount of effect increases when
dial is turned clockwise.
Amount of effect increases when
dial is turned clockwise. When dial is
turned fully counterclockwise, only
original sound is output.
Sets balance of original sound and
roll sound.
Sets balance of original sound and
roll sound.
Sets balance of original sound and
roll sound.
Sets balance of original sound and
roll sound.
Sets volume of RETURN input
sound.