Speed Dialing; Storing Phone Numbers - Sony ID Telephone SPP-ID200 Manual De Instrucciones

Speed dialing

You can store the numbers you
frequently call into memory so
that you can dial a number
with two buttons.

Storing phone numbers

!
While storing a number, you
cannot receive calls.
!
Do not enter a phone number
that exceeds 16 digits (the tone
and pause digits are each
counted as one digit); otherwise,
you will hear five short error
beeps and you must start over
again.
TALK/DIAL
button
PAUSE button
SPEED DIAL button
1
Press PGM.
"<<PROGRAM>>" appears on the display.
2
Press SPEED DIAL.
"ENTER 0~9" appears on the display.
3
Press one of the dialing keys (0 to 9).
You hear a confirmation beep.
4
Dial the phone number you wish to store.
If you enter a wrong number, press OFF and start again
from step 1.
5
Press PGM.
You hear a long confirmation beep, and the number is
stored.
p Note on storing numbers
Do not let more than 20 seconds elapse between any two steps of
the storing procedure.
p To change a stored number
Program a new number using the procedure above. The old
number will be erased automatically.
OFF button
PGM button
Speed dialing
SPP-ID200(ES) 3-810-886-11(1)
23