Publicidad
Idiomas disponibles
Idiomas disponibles
Wireless remote control (RC-1336)
EJECT (-) button
This has the same function as the EJECT (-) button on the
main unit. (see "Inserting and removing discs" on page 18)
7 button
This has the same function as the PLAY (7) button on the
main unit.
8 button
This has the same function as the STOP (8) button on the
main unit.
MENU button
This has the same function as the HOME/MENU button on the
main unit.
m/, buttons
i Press and hold these buttons to search backward/forward.
(see "Searching backward and forward" on page 24)
i When the current source is DAB or FM, press to automatically
search received frequencies for that frequency mode. (see
"Changing the received frequency" on page 33)
k/j buttons
i When the current source is USB or SD and the playback area
is folder ( icon shown), press the k button to move up one
folder level. (see "Playback area" on page 21)
i When the current source is DAB or FM, press the k/j button
to select a preset station.
i When a Menu setting screen is open, press the k button to
move up one menu level.
i The j button has the same function as the remote control
ENTER button.
Number (0–9) buttons
i When the current source is CD, USB or SD and the playback
area is set to "All", use the number buttons to select tracks by
their track numbers. For track numbers, a maximum of two
digits can be input for audio CDs and three digits for data
CDs. (see "Selecting tracks directly" on page 22)
i When the current source is DAB or FM, press to tune in a pre-
set station.
PROGRAM button
i When the current source is CD, press this to start program
setting mode. Press this to check and edit the program
after it has been prepared. (see "Preparing the program" on
page 26)
i When the current source is DAB or FM, press to program
preset stations manually. (see "Setting radio station presets
manually" on page 33)
i When the current source is DAB or FM, press and hold to pro-
gram preset stations automatically. (see "Setting radio station
presets automatically" on page 33)
DUB button
Press when stopped to start dubbing (copying) preparation.
(see "Dubbing procedures" on page 36)
FM MODE button
When the current source is FM, press to switch between stereo
and mono for FM broadcast reception. (see "Setting the FM
mode" on page 33)
SOURCE button
This has the same function as the SOURCE button on the main
unit. (see "Selecting the playback source" on page 19)
9 button
This has the same function as the PAUSE (9) button on the
main unit.
DISPLAY/RDS/INFO [PAIRING] button
i Press during playback to show a variety of information. (see
"Time and text information display" on page 29)
i When the current source is BLUETOOTH, press and hold to
activate Bluetooth pairing mode. Press when pairing to end
pairing mode. (see "Pairing" on page 30)
i Press when the current source is FM to switch the RDS mode.
(see "RDS (Radio Data System)" on page 34)
i When the input source is DAB, press to start automatic station
selection.
.// [l/;] buttons
i When the current source is CD, USB or SD and the playback
area is set to "All", press to skip tracks. (see "Skipping to earlier
and later tracks" on page 21)
i When the current source is USB or SD and the playback area
is folder ( icon shown), press to move between tracks and
folders. (see "Playback area" on page 21)
i If the current source is DAB or FM, press to change the fre-
quency received. (see "Tuning in radio stations" on page 33)
i When a Menu screen is open, turn to select items and change
setting values. (see "Basic Menu screen operations" on
page 15)
ENTER button
When a Menu screen is open, press to confirm selections and
settings.
EN
13
Publicidad
