Publicidad
Idiomas disponibles
Idiomas disponibles
Using the repeat playback function
All tracks in the playback area can be played back repeatedly.
Specified intervals within a track can also be played back (A-B
repeat playback).
Ordinary repeat playback settings
A selected track or all tracks can be played back repeatedly.
Press the main unit SHIFT button to activate shift mode (SHIFT
indicator lit), and press the 4 [REPEAT] button to select one of the
following repeat modes.
The remote control REPEAT button can also be pressed to cycle
through the modes.
Single track repeat ("1REP" shown on the Home Screen)
The selected track will play back repeatedly.
All track repeat ("REP" shown on the Home Screen)
All tracks* will play back repeatedly.
*When playing a folder on a data CD, all tracks in the folder will be
repeated. During program playback, all tracks in the program will
be repeated.
Off (no indicator)
Playback will not repeat.
Turning off repeat playback
Press the REPEAT button on the main unit or remote control
repeatedly until "1REP" and "REP" do not appear on the display.
NOTE
i If repeat playback is enabled during playback, playback will
continue as is until everything has been played. Then, playback
will continue from the beginning. If it is enabled when playback
is stopped, pressing the PLAY (7) button will start repeat
playback.
i The repeat function setting is retained even when the unit is
turned off.
A-B repeat playback settings (audio CDs only)
Specified intervals within a track can be played back (A-B repeat
playback). Follow the procedures below to use A-B repeat playback.
1.
Select CD as the current source. (see "Selecting the playback
source" on page 19)
2.
When playing back or when playback is paused at the point
where you want the repeat playback interval to start (A), press
the main unit SHIFT button to activate shift mode (SHIFT
indicator lit) and press the 5 [A-B REP] button. The remote
control A-B REP button can also be pressed.
A- appears on the Home Screen.
CD
A-
3.
At the point where you want the repeat playback interval to
stop (B), press the main unit SHIFT button to activate shift
mode (SHIFT indicator lit) and press the 5 [A-B REP] button.
The remote control A-B REP button can also be pressed.
A-B appears on the Home Screen.
This confirms the set interval (A-B) and starts A-B repeat
playback.
CD
A-B
ATTENTION
A-B repeat is not possible with data CDs, SD cards or USB flash
drives.
NOTE
i Press the main unit STOP (8) button or remote control 8
button to stop the unit and clear the set A-B repeat interval.
Changing the track or the current source will also clear the
repeat interval.
i The A-B repeat playback interval cannot include more than one
track.
i The A-B repeat setting is not retained when the unit is off or in
standby.
PLAY
01 00:10
PLAY
01 00:22
25
EN
Publicidad
