Adjusting The Handle Height; Walking - Invacare Dolomite Legacy Manual Del Usuario

IMPORTANT!
The walking aid must be fully unfolded and locked
with the folding handle before using the product.
– The folding handle locks when a clicking sounds
is heard.
Folding
1. Lift up/loosen the safety latch.
2. Lift the handles in order to fold the walking aid into
folded position.

4.3 Adjusting the Handle Height

WARNING!
Risk of falling
– Always ensure that the hand knobs are
tightened securely to prevent the handle from
unintended lowering.
– Do not set the handles above their highest
allowed position, indicated by the marking on
the tubes.
82038-F
If the user is not supposed to adjust the height
of the handles, e.g. for safety reasons, the hand
knobs can be replaced by locking screws (available
as accessory).
Recommended height: The handles should be
positioned at wrist height when standing straight
with relaxed arms. Therapist may suggest different
heights depending on specific needs of the client.
1. 2.
1. Turn the hand knob counterclockwise and remove it.
Remove the screw.
2. Adjust the handle to suitable height.
3. Insert the screw and the hand knob. Turn the hand
knob clockwise to tighten.
4. Repeat the procedure on the other side.

4.4 Walking

WARNING!
Risk of falling
– Be careful if the wheels stop against an
obstacle, e.g. a kerb.
Usage
3.
11