Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT SAFETY INSTRUCTIONS
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read
and obey all safety messages.
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury,
and tell you what can happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
A. This gas stove is equipped with a three-prong plug with ground contact for protection against the risk of
electric shock. It must be plugged at all times directly into a grounded outlet.
B. Do not cut or remove the ground end of the plug.
C. Unplug the circuit breaker or disconnect the product from the power supply before making any
maintenance service on it.
D. Replace all components before turning on the product.
E. If the power supply cord is damaged, it must be replaced by the manufacturer, please contact the
Whirlpool service center.
F. Do not use extension cords or multiple contacts.
G. Do not have wet hands when connecting or disconnecting your device.
H. Use two or more people to move and install your product.
I. Do not allow children to use it or people who do not know how it works.
J. For any repair, parts change or maintenance, contact the Whirlpool service center.
•
Keep the surroundings of the appliance free of combustible materials, gasoline
and other vapors or flammable liquids.
•
Do not obstruct the exhaust of the combustion gases from the oven or grill.
•
Do not use this device as a room heater.
•
Make sure that the furniture near your stove, as well as the wall and floor, support
a temperature higher than 95°C so that they do not suffer deformations.
If it smells like gas:
- Open the windows.
- Do not operate the electric switches.
- Turn off all flames by closing the general valve.
- Call immediately to a Leak Suppression Service or your gas supplier.
ATTENTION: If the power cord is damaged, it must be replaced by the manufacturer, an
authorized service agent or qualified personnel to avoid any hazards.
31
In some European factories the letter "W" of the part code mentioned herein will be automatically
17-Sep-2019 13:32:01 EDT | RELEASED
All manuals and user guides at all-guidesbox.com
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or
"WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately follow
instructions.
You can be killed or seriously injured if you don't follow instructions.
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
.
.
.
Publicidad
