Publicidad
Idiomas disponibles
Idiomas disponibles
Notes:
•
If the range is disconnected from the electrical wall outlet or the power supply is missing,
the time must be adjusted again, repeating the procedure.
•
In case you do not want the screen to show the time, after "12:00" flashes, or at any
time after setting up the time, press the CANCEL button. The screen won't display any
information, as if it was off.
Important:
•
All functions of the range can be selected and used normally, even when the screen is not
showing the time; To do this, select the function you want.
•
To display the time on the screen again, at any time, follow the instructions in steps 1, 2,
and 3 of this section.
2.2 TIMER
Your oven has the option that allows you to monitor a previously programmed time to assist in
your daily activities. You can activate this command without the product being in operation.
To activate the timer.
2.3 OVEN LIGHT
To visualize your preparations without opening the oven door.
2.4 USING THE FULLTOUCH (KEY LOCK) ELECTRONIC PANEL COMMANDS
The KEY LOCK function allows blocking the commands of the Fulltouch electronic panel. This
keypad lock feature provides security so that no adjustment is accidentally modified.
41
In some European factories the letter "W" of the part code mentioned herein will be automatically
17-Sep-2019 13:32:01 EDT | RELEASED
All manuals and user guides at all-guidesbox.com
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
1. Press the Timer button and then Clock.
2. Press the + and - buttons to adjust the
time. 3. Press START to start counting.
4. The timer will start counting the time
and emit sound when finished
5. To turn off the sound press cancel.
1. To turn on the oven light, press the Light
button. Press the Light button again to turn
off the oven light.
According to model, push
1. Oven light
2. Only knobs
3. Oven Knobs
4. Turn off everything
To activate the KEY LOCK function
1. Click and hold the TIMER / KEY LOCK
button for approximately 3 seconds.
To deactivate the KEY LOCK function
1. Press the TIMER / KEY LOCK button for
approximately 3 seconds.
Publicidad
