Publicidad
Idiomas disponibles
Idiomas disponibles
Changing the oven light
The oven light is a standard 40-watt appliance halogen bulb. It comes on when the
oven door is open. When the oven door is closed, touch
or off. It will not work during a self-cleaning cycle.
01
NV51R5511D_AA_DG68-01126A-00_EN.indd 33
to turn the light on
1.
To change the halogen bulb, you must
tilt the broil heater down. To do this,
turn the circular nut on the support
counterclockwise while holding the
broil heater. The broil heater should
loosen and tilt down.
Important: The broil heater is not a
removable part. Do not force the broil
heater down. Do not let it drop down.
2.
Remove the glass cover.
Remove the halogen bulb cover.
3.
4.
Replace the halogen bulb.
5.
When done, replace the halogen bulb
cover, replace the glass cover, and then
follow Step 1 above in the reverse
order to return the broiler to its correct
position.
CAUTION
Before changing your oven light, disconnect
the electrical power to the oven at the main
fuse or circuit breaker panel. Make sure the
oven and the halogen bulb are cool.
Troubleshooting
Troubleshooting
Samsung works hard to ensure that you don't have problems with your new
electric oven. If you run into unexpected trouble, look first for a solution in the
tables below. If you're still having trouble after trying the suggested solution, call
Samsung at 1-800-SAMSUNG (726-7864).
CONTROL DISPLAY
Problem
Possible cause
The display
A fuse in your home may be
goes blank.
blown or the circuit breaker
tripped.
The buttons
•
There is foreign matter
cannot be
caught between the
pressed
buttons
properly.
Touch model: There is
•
moisture on the exterior
•
The lock function is set
Solution
Replace the fuse or reset the
circuit breaker.
•
Remove the foreign
matter and try again.
•
Remove the moisture and
try again.
•
Check whether the lock
function is set.
English 33
2019-03-08
12:13:07
Publicidad
