Triton TDJ600 Instrucciones De Funcionamiento Y Seguridad página 8

• With the tool disconnected from power, unscrew
the Brush Caps (5). Remove the brushes by pulling
carefully on the protruding springs. If either of the
brushes are worn to less than 6mm long, they must
both be replaced using genuine Triton replacement
brushes.
CLEANING
1. Remove dust and dirt regularly. Frequently blow or
vacuum dust away from all sander parts and the motor
housing.
WARRANTY
To register your guarantee visit our web site at
www.tritontools.com* and enter your details.
Your details will be included on our mailing list (unless
indicated otherwise) for information on future releases.
Details provided will not
be made available to any third party.
GB
PURCHASE RECORD
Date of Purchase: ___ / ___ / ____
Model: TDJ600
Serial Number: __________________
Retain your receipt as proof of purchase
Service & Maintenance / Warranty
8
2. Re-lubricate all moving parts at regular intervals.
3. Never use caustic agents to clean plastic parts.
Do not use cleaning agents to clean the plastic parts
of the tool. A mild detergent on a damp cloth is
recommended. Water must never come into contact with
the tool.
Triton Precision Power Tools guarantees to the
purchaser of this product that if any part proves to
be defective due to faulty materials or workmanship
within 12 MONTHS from the date of original
purchase, Triton will repair, or at its discretion
replace, the faulty part free of charge.
This guarantee does not apply to commercial use
nor does it extend to normal wear and tear or
damage as a result of accident, abuse or misuse.
* Register online within 30 days.
Terms & conditions apply.
This does not affect your statutory rights