Power
Nominal voltage
Power consumption
Brush engine output
Working width
Brush diameter
Brush speed
Dimensions and weights
Theoretical surface cleaning performance
Volume, fresh water reservoir
Length (without pushing handle)
Width
Height (without pushing handle)
Weight (without tank content, without brushes)
Noise emission
Sound pressure level (EN 60704-1)
Machine vibrations
Vibration total value (ISO 5349)
Brush roller, red (medium, stan-
dard)
Brush roller, green (grit)
Brush roller, orange (high/ low)
Brush roller, white (soft)
Pad roller shaft
Pad, very soft, white
Pad, soft, yellow
Pad, medium soft, red
Pad, hard, green
Microfibre roller
Extension cable
Warranty
The warranty terms published by our
competent sales company are applica-
ble in each country. We will repair po-
tential failures of your accessory within
the warranty period free of charge, pro-
vided that such failure is caused by
faulty material or defects in fabrication.
In the event of a warranty claim please
contact your dealer or the nearest au-
thorized Customer Service center.
Please submit the proof of purchase.
Spare parts
Only use accessories and spare
–
parts which have been approved by
the manufacturer. The exclusive
use of original accessories and orig-
inal spare parts ensures that the ap-
8
English
Specifications
Accessories
For cleaning slightly dirtied or sensitive floors.
For cleaning heavily dirtied floors.
For scrubbing structured floors (safety tiles, etc.).
For polishing floors.
For intake of roller pads.
For cleaning and polishing sensitive floorings.
For polishing floors.
For cleaning slightly dirtied floors.
For cleaning normal to heavily dirtied floors.
To remove grey tint
20 m
pliance can be operated safely and
troublefree.
At the end of the operating instruc-
–
tions you will find a selected list of
spare parts that are often required.
For additional information about
–
spare parts, please go to the Ser-
vice section at www.kaercher.com.
V/Hz
120 / 1~60
A
W
1100
mm
400
mm
1/min
650
m²/h
400
l
mm
490
mm
460
mm
250
kg
dB(A)
m/s²
2,47
Order No.
4.762-249.0 1
2
4.762-252.0 1
2
4.762-251.0 1
2
4.762-250.0 1
2
4.762-228.0 1
2
6.369-727.0 1
2
6.369-724.0 1
2
6.369-726.0 1
2
6.369-725.0 1
2
4.114-003.0 1
2
6.647-022.0 1
1
9
96
10
27
73