Publicidad
Idiomas disponibles
Idiomas disponibles
en-us_main.book.book Page 34 Tuesday, July 18, 2023 6:28 PM
34 OPERATION
CAUTION
• Match the size of the cooktop element to the size
of the cookware in use. Using a large element for
a small pan wastes heating energy, and the
exposed surface of the element is a burn or fire
hazard.
NOTE
• Hot Surface Indicator
- The hot surface indicator light glows as long as
any surface cooking area is too hot to touch.
- It remains on after the element is turned off
and until the surface has cooled to
approximately 150 ˚F.
Turning on a Single Element
1
Push the Single element knob in
2
Turn the knob in either direction to the
desired setting
.
B
• The control knob clicks when it is positioned
at OFF, HI and LO.
Heating element
OFF
NOTE
• HI is the highest temperature available.
• LO is the lowest temperature available.
Turning on a Bridge Element
There is one dual element located in the left front
position which can be used as a single or bridge
element. The bridge element heats the front single
element and the area between the 2 left single
elements.
1
Push in the appropriate knob.
2
Turn the knob to use it as a single element or
a bridge unit.
• To use it as a single element, turn the knob
counterclockwise.
• To use it as a bridge element, turn the knob
clockwise.
.
A
Bridge
a
Single
b
Turning on a Triple Element
There is one triple element that can be used as
either a single, dual or triple element.
1
Push in the appropriate knob.
ON
2
Turn the knob to use it as a single, dual or
triple element.
• To use it as a single element, turn the knob
counterclockwise.
• To use it as a dual element, turn the knob
clockwise to the dual position.
• To use it as a triple element, turn the knob
clockwise to the triple position.
Icon Type 1
Icon Type 2
Single
Bridge
B
A
Publicidad
