en-us_main.book.book Page 64 Tuesday, July 18, 2023 6:28 PM
64 MAINTENANCE
4
Set the time of day you would like the Self
Clean to start by pressing numbers.
5
Press START.
NOTE
• It may become necessary to cancel or interrupt a
Self Clean cycle due to excessive smoke or fire in
the oven. To cancel the Self Clean function, turn
the oven mode knob to the OFF position.
Removing/Assembling Lift-Off
Oven Doors
Door Care Instructions
Most oven doors contain glass that can break.
CAUTION
• Do not close the oven door until all the oven
racks are fully in place.
• Do not hit the glass with pots, pans, or any other
object.
• Scratching, hitting, jarring, or stressing the glass
may weaken its structure causing an increased
risk of breakage at a later time.
Removing Doors
1
Fully open the door.
2
Lift up the hinge lock
hinge arm
completely.
d
Locked Position
Slot
a
Hinge Lock
b
Oven Frame
c
Hinge Arm
d
and flip it towards the
b
Unlocked Position
3
Firmly grasp both sides of the door at the top.
4
Partially close the door to approximately 5
degrees
. If the position is correct, the hinge
a
arms will move freely.
about 5°
a
5
Lift and pull the door towards you until the
hinge latches are completely loosened.
Assembling Doors
1
Firmly grasp both sides of the door at the top.
2
Fully insert the hinge arms
until the indentations
c
rest on the bottom edges of the slots.
Hinge Arm
a
Bottom Edge of Slot
b
Indentation
c
3
Slowly open the door fully. Make sure that the
hinge arms are properly engaged in the slots.
into the slots
a
b
on the hinge arms