Olimpia splendid CALDO UP T Instrucciones Para El Uso Y El Mantenimiento página 43

• If there is no damage:
- plug the unit back in;
- switch it on as described above.
If the heater still does not turn on, please contact Customer Service for assistance.
5 - MAINTENANCE AND CLEANING
Before carrying out any cleaning or mainte-
nance operation on the appliance, switch it off
by setting the ON/OFF switch (6) to "O". Dis-
connect the plug from the power outlet and
wait for the hot parts to cool down.
• Use a dry cloth to clean the appliance.
• If the appliance is very dirty, it is possible to use a cloth dampened with warm water
(max 50°C) and a mild detergent to clean its external parts. Dry with a dry cloth (fig. L).
• Use a vacuum cleaner to remove dust from the air inlet/outlet grids.
• Make sure the appliance is completely dry before reconnecting the
plug to the power socket.
• Do not use a chemically treated or antistatic cloth to clean the
appliance.
• Do not use petrol, solvents, polishing pastes or similar. These
products could break or deform the plastic surface.
• Do not use oils, chemical substances or abrasive products to clean
the appliance.
• Neither wash nor immerse the appliance with/in water.
• In case of an appliance malfunction, do not try to disassemble it but
instead refer to the retailer or to the technical assistance service.
6 - PRESERVATION OF THE APPLIANCE
• If you do not intend to use the appliance for a particularly long period of time or if
operations which could produce a lot of dust must be performed, it is advised to store
the appliance as follows:
• Switch the appliance off and disconnect the plug from the power socket.
• Store in a fresh and dry place away from humidity.
CALDO UP T EN - 19