HOMCOM 820-257 Manual De Instrucciones Y Montaje página 6

Part 2 Weekly time and Window open detection
SET CURRENT TIME (ONLY by remote control)
- Press to switch on the appliance.
- Press SET to display the hour.
- Press + or - to set the current hour (00 to 23).
- Press SET again to display the minute.
- Press + or - to set the current minute (00 to 59).
- Press SET again to display the day of week.
- Press + or - to set the current day (d1= Monday,d2=Tuesday,d3=Wednesday,
d4 = Thursday, d5 = Friday, d - Press OK to confirm the setting).
For example, Wednesday 9:30 , Setting temperature = 25°C :
SET
To check the current time and setting temperature, press SET again.
If main switch off or power cutoff , it need reset the time
.The current time must be set before any programming.
- Press to switch on the appliance.
1- Press P to enter into weekly program setting (the light P is on).
2- Press DAY to set the day of program activation (d1, d2,d7...),
3- Press EDIT to set the time period number (P1, P2,...P6),
4- Press TIME/ON to set the turn-on time (00, 01, 02...,24,)
Cannot set to minutes.
5- Press TIME/OFF toset theturn-offtime (00, 01, 02,..., 24)
Cannot set to minutes.TIME/OFF can not be less than TIME/ON.
6- Press + or - to set the setting temperature of this time period.
5 seconds
SET
SET
SET
5
EN