Publicidad
Idiomas disponibles
Idiomas disponibles
Safety Equipment and Labels
ON-OFF
Switch
Throttle Interlock
IMPORTANT!
Caution, Danger, Warning, and Operation Information
Labels: Make sure all information labels are undam-
aged and readable. Immediately replace damaged or
missing information labels. New labels are available
from your local authorized Shindaiwa dealer.
Figure 2
Specifications
Model....................................................................................................
Engine Model....................................................................................................
Engine Type...............................................................................................................................
Engine Bore x Stroke......................................................................................................................................
Engine Displacement..............................................................................................................................................
Unit Weight, Less Fuel.......................................................................
Unit Dimensions (LxWxH)..........................................................
Max. Power.....................................................................................................................................
Fuel/oil ratio...........................................................................................................
Fuel Tank Capacity........................................................................................................................................
Carburetor...........................................................................................................................................
Ignition.........................................................................................................................................
Spark Plug.........................................................................................................................................................
Air Cleaner...............................................................................................................................
Starting Method..................................................................................................................................................
Stopping Method................................................................................................................................
Blade Length........................................................................
Blade Type........................................................................
Clutch Type..........................................................................................................................................
Gear Type.............................................................................................................................................................
Gear Lubrication........................................................................................................................................
Standard Equipment............................................................................
Options.............................................................................................
**EPA Emission Compliance Period..............................................................................................................
** The EPA emission compliance referred to on the emission compliance label located on the engine, indicates the number of operating hours for which the
engine has been shown to meet Federal emission requirements.
Category C = 50 hours (Moderate), B = 15 hours (Intermediate) and A = 300 hours (Extended).
* meets or exceeds these specifications and is recommended for all Shindaiwa products.
Specifications are subject to change without notice.
4
Cover
DH2510
CAUTION
READ AND
WEAR EYE
THE BLADES
FOLLOW THE
AND HEARING
ARE SHARP!
INSTRUCTIONS
PROTECTION
HANDLE WITH
IN THE
AT ALL TIMES
CARE.
OPERATORS
DURING
MANUAL.
OPERATION.
Caution Label
HT510-30: 1100 x 10 x 30mm
HT510-40: 1400 x 10 x 30mm
HT510-30: 740mm / HT510-40: 1055mm
Double-blade cutting action: single-edged blade
Heavy-Duty Blade (30" & 40")
Protector
Warning Label
ON-OFF
KEEPS HANDS
CLEAR OF
CUTTER
Switch
BLADES WHEN
STARING THE
ENGINE.
Throttle Interlock
HT510-30 / HT510-40
SHT510
4-cycle, horizontal cylinder, air cooled
HT510-30: 5.7kg (1.5lb)
HT510-40: 6.0kg (13.lb)
1.1 hp (.83kw)@ 7,500 rpm (min
50:1 with *ISO-L-EGD or JASO FC class -cycle Mixing Oil
Walbro WYJ, Diaphragm type
Fully electronic, program controlled
Non-reversible heavy-duty filter element
Slide switch, grounding type
Centrifugal clutch, dry-type
Rear handle with integral controls, anti-vibe mountings , front handle with guard,
spark plug wrench and blade scabbard (cover)
WARNING
Use caution to
avoid misassembly
Assemble as
per illustration
CAUTION
HT2510
DH510-4 / DH510-30
34mm x 7mm
4.5cc
DH510-4: 5.8 kg (1.8 lb)
DH510-30: 5.9 kg (13.0 lb)
DH510-4: 1100 x 45 x 30mm
DH510-30: 10 x 45 x 30mm
)
-1
0.55 liter/18.6 oz.
NGK CMR5H
Recoil type
DH510-4: 610mm / DH510-30: 740mm
Double-blade cutting action: Double-edged blade
Spur gears
Lithium-based grease
Category A
Cover
Protector
READ AND
WEAR EYE
KEEPS HANDS
THE BLADES
FOLLOW THE
AND HEARING
ARE SHARP!
CLEAR OF
INSTRUCTIONS
PROTECTION
HANDLE WITH
CUTTER
IN THE
AT ALL TIMES
CARE.
BLADES WHEN
OPERATORS
DURING
STARING THE
MANUAL.
OPERATION.
ENGINE.
Caution Label
SDH510
Publicidad
