3. Other Information for This Machine
Laws and Regulations
Duplication and Printing Prohibited
Do not copy or print any item for which reproduction is prohibited by law.
Copying or printing the following items is generally prohibited by local law:
bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports,
driver's licenses.
The preceding list is meant as a guide only and is not inclusive. We assume no responsibility
for its completeness or accuracy. If you have any questions concerning the legality of copying
or printing certain items, consult with your legal advisor.
Legal Requirements
Laser Safety
For Pro C9500/C9500H
This machine complies with the requirements of IEC 60825-1:2014 (EN 60825-1:2014) for
class 1 laser product. The machine contains four VCSELs (Vertical Cavity Surface Emitting
Laser), 772–792 nanometer wavelength for each emitter. The beam divergence angle is 5.5
degrees (minimum) and 7.9 degrees (maximum) in the vertical direction, and 5.5 degrees
(minimum) and 7.9 degrees (maximum) in the horizontal direction, and laser beams are
generated in Continuous Wave (CW) mode. Each VCSEL has forty light sources and the
maximum output power of each light source is 1.23 milliwatt.
The following label is attached on the rear side of the machine:
Caution
Use of controls or adjustments or performance of procedures other than those specified in
this manual might result in hazardous radiation exposure.
For Media Identification Unit Type S3
Media Identification Unit (optional) complies with the requirements of IEC 60825-1:2014 (EN
60825-1:2014) for class 1 laser product. Media Identification Unit contains one VCSEL (Vertical
Cavity Surface Emitting Laser), 772–792 nanometer wavelength. The beam divergence
angle is 5.3 degrees (minimum) and 7.9 degrees (maximum) in the vertical direction, and 5.3
degrees (minimum) and 7.9 degrees (maximum) in the horizontal direction, and laser beams
are generated in Continuous Wave (CW) mode. The VCSEL has twelve light sources and the
maximum total output power is 2.5 milliwatt.
The following label is attached on the bottom of the machine.
Caution
Use of controls or adjustments or performance of procedures other than those specified in
this manual might result in hazardous radiation exposure.
Note to Users EEA Countries
Model Name: Pro C9500/C9500H
Manufacturer:
Ricoh Co., Ltd.
3-6 Nakamagome 1-chome, Ohta-ku, Tokyo. 143-8555, Japan
Importer (CE marking, ProdSG):
Ricoh Europe SCM B.V.
Blankenweg 24, 4612 RC Bergen op Zoom, The Netherlands
Importer (UKCA marking):
Ricoh UK Limited
800 Pavilion Drive, Ricoh House, Northampton, NN4 7YL
Declaration of Conformity
Notice to Users in EEA Countries
This product complies with the essential requirements and provisions of Directive 2014/53/
EU.
19