running ways of sleeping wind mode.
High speed and sleeping mode on: First runs 30 minutes in high speed normal wind , then 30
minutes middle normal wind, and last switches to low speed normal wind.
Middle speed and sleeping mode on: First runs 30 minutes in middle speed normal wind ,
then switches to low speed normal wind.
Low speed and sleeping mode on: Low speed, normal wind runs.
In the sleep wind mode, the wind speed indicator light of the corresponding gear changes
with the switch of the normal wind mode.(For example: turn on the sleeping wind under
the mid-range wind speed, and automatically switch to the low-range normal wind after the
mid-range normal wind runs for 30 minutes. At this time, the mid-range wind speed indicator
light will be off and automatically switch to the low-range wind speed indicator light.)
3. "
"Wind speed/Time minus key:
In the power-on state, after pressing the time key or the fan speed key, press this key again
to adjust the timing function and fan speed gear. The timing step is 1H. In normal wind mode,
the wind speed step is 1 gear, which can be adjusted quickly by long-pressing; in natural wind
and sleep wind mode, the wind speed step is 8 gears.
4. "
" Speed key :
4.1、In the power-on state, press the button, the LED
lights up, and then press the "
" and "
" buttons to adjust the wind speed in 1-24 settings. The adjustment does not
cycle, and the step length is 1 setting.(In natural wind and sleep wind mode, the steps are 8
settings, which are 8, 16, and 24 settings respectively, indicating low, medium and high wind
speeds), and the digital tube
displays the corresponding settings.
4.2、 If the setting adjustment key is not operated for 5 seconds or other keys (except the
power button) are pressed within 5 seconds, the setting will be exited and the currently set
wind speed setting will be determined.
4.3、Dry air function:
a. In the power-on state, press and hold the "
" button for 3s to enter the dry air function,
start the high-end air, the Led_
light flashes, and it continues to run for 20 minutes;
b. During the operation of the dry air function, except for the "
" fan speed key and the "
" on/off key, other function keys are invalid. (Long press the "
" key for 3s to exit the
dry air function)
c. After the high-grade wind runs for 20 minutes, the machine will automatically shut down
and enter the standby state.
5. "
"Timer key:
5.1. In the power-on state, press the "
" key to enter the timing and the timing LED
lights up, the time selection range is 1-12 hours, and then press the "
" and "
" keys to
adjust the working time set by the machine up and down, the adjustment does not cycle, The
timing setting range is 1-12H, and the step size is 1H. The digital tube flashes and displays the
set working time. If the set working time is 0, the timing setting will be canceled.
5.2. If the timing adjustment key is not operated for 5 seconds or other keys (except the
power button) are pressed within 5 seconds, the timing setting will be exited and the
currently set time will be determined.
5.3. After the timing setting is over, the digital tube will alternately display the current
remaining working time and the current wind speed gear every ten seconds.
5.4. After the timing is over, the machine will shut down and enter the standby state. The
timing error of the machine is ±3%.
6. "
" key:
In the power-on state, after pressing the timing key or the fan speed key, press this key again
to adjust the timing function and fan speed gear. The timing step is 1H. In normal wind mode,
the wind speed step is 1 setting, which can be adjusted quickly by long-pressing; in natural
41