Publicidad
Idiomas disponibles
Idiomas disponibles
10.- Place the heating elements back into their original position. Place the other two rows of storage bricks with the flat side facing
out and always on the heating elements supporting tabs.
11.- Next replace the metallic plate in the top of the storage core, between the bricks and the Microtherm insulation panel with
the flat side facing up. It must be placed in the right position for the fan to work correctly.
12.- Place the third row of storage bricks with the flat side facing out.
13.- Refit the inner front panel. If the bricks have been fitted correctly you will have no difficulty in refitting the panel.
Make sure the bottom edge of the inner panel is inside the front lip of the heater. Please see below
18
Publicidad
