Publicidad
Idiomas disponibles
Idiomas disponibles
3.3. Utilization of photovoltaic surplus
PREPARATORY STEPS
Before using the PV surplus utilization function of your Ecombi ARC storage heaters, please perform the following steps:
a. Installation and setting of the control hub and power meters included in the Solar Box. Please follow the instructions included
within.
b. Download from your market app the Elnur Gabarron Wifi Control app, available for IOS & Android.
c. Create your user account in the app if you still do not have one.
d. Register the control hub included in the Solar Box using your user account. Then link also the power meters included in the
Solar Box if you still have not.
e. Link the Ecombi ARC storage heaters to the control hub using the app. (See point 4. Remote Operation using the G-Control
Hub for more detail).
To set and activate the PV surplus utilization function it is necessary to install the Solar Box device (1 Solar box per installation).
The PV surplus utilization function is only valid for installations for self-consumption connected to the grid and discharging energy
to the network.
ACTIVATION AND SETTING
The activation and setting of the PV surplus utilization function is done exclusively through the app.
Solar Energy activation. Surplus utilization
Once you have completed the aforementioned steps, access the app with your user name and keyword, and complete the following
steps:
-
Access section "Heating" from the bottom menu.
-
Select and access the appliance you want to set.
-
Select the option "Setup" from the bottom menu
-
Turn on or off the PV surplus utilisation function through the activation or deactivation of the "Activation State"
parameter in the "Solar Energy" menu.
22
Publicidad
